Front wiper blade replacement

N_QVe27_C12_009_1_ER

For your convenience, and to prevent bonnet paint damage, move the windscreen wiper blades to the service position. After turning off the vehicle, move the wiper switch to the single wiping 1X position within 20 seconds. Hold the switch for more than 2 seconds until the wiper blades are pointing straight up.

NOTE

Wiper arms

  • Do not allow the wiper arm to fall against the windscreen, as it may crack or chip the glass.

  • Do not pull the wiper arm forward, as the arm could chip the bonnet paint.

  1. Raise the wiper arm.
  2. Whilst pushing the clip, pull the wiper blade. Remove the wiper blade from the wiper arm.
    N_QVe27_B12_009_1_E
  3. Install a new wiper blade assembly in the reverse order of removal.
    N_QVe27_B12_010_1_E
  4. Make sure that both blade assemblies are installed firmly by trying to pull them slightly.
  5. Return the wiper arms to the windscreen.
  6. Start the vehicle to the POWER ON position to return the wiper arms to their normal operating position.