Smart regeneration system activation
With 'AUTO' for the regenerative braking level displayed on the cluster, the regenerative braking level is controlled automatically when vehicle speed is above 12 km/h (7.4 mph) and one of the condition below is met.
-
The road gradient changes
-
Distance from the vehicle ahead reduces or increases
-
Speed of the vehicle ahead reduces or increases
When vehicle speed is under 12 km/h (7.4 mph), the Smart Regeneration System is cancelled. The driver must adjust the vehicle speed by depressing the accelerator or brake pedal according to the road condition ahead and driving condition.
When the system is turned on from the Vehicle Settings menu, but the front radar does not recognise the vehicle in front, 'AUTO' is displayed in white.
If the front radar recognises the vehicle in front, 'AUTO' is displayed in green. The regenerative braking level is automatically controlled depending on the driving condition of the vehicle in front and the level is indicated with arrows.
However, current regenerative braking level is maintained if the driver depresses the brake pedal whilst the system is in activation. Also, the system is cancelled temporarily if the accelerator pedal is depressed.
The Smart Regeneration System which automatically controls the regenerative braking level when coasting is only a supplemental system for the driver's convenience. Do not solely rely on this system to stop the vehicle. The system cannot completely stop the vehicle in all situations nor avoid all collisions. The brake control may be insufficient depending on the speed of the vehicle in front and when the vehicle in front suddenly stops, a vehicle cuts in suddenly or there is a steep slope. Always look ahead cautiously to prevent unexpected and sudden situations from occurring.
Smart regeneration system will be temporarily cancelled when:
-
Canceled manually
With the vehicle on, touch Settings →Vehicle → Eco Vehicle → Smart Recuperation on the infotainment system or pull and hold the right side paddle shifter for over 1 second.
The Smart Regeneration System turns off and switches to the regenerative braking level indicator with arrows instead of ‘AUTO’ indicator.
-
Canceled automatically
-
The vehicle is shifted to N (Neutral), R (Reverse) or P (Park) or shift lever in manual mode.
-
Switch the DRIVE mode to SPORT mode.
-
Smart Cruise Control is in activation.
-
The ESC (Electronic Stability Control) or ABS is operating.
-
If the motor and battery are in high or low temperature, or there is a problem with the battery or transmission.
-
SOC (State of Charge) gauge indicates high level.
-
When the Smart Regeneration System is cancelled automatically, adjust the vehicle speed directly by depressing the accelerator or brake pedal according to the road and driving conditions ahead.
The infotainment system may change after software updates. For more information, refer to the manual provided in the infotainment system and the quick reference guide.