Driving Rear View Monitor (DRVM) function (if equipped)
Driving Rear View Monitor function is used to switch ON the Rear View Monitor when driving forward.
You can turn on the function by pressing the DRVM button (
) on the infotainment display or by pressing Parking/View button (
) on the console.
You can also assign DRVM function to Favorite Button (
) around the infotainment display.
No guidelines will be shown when DRVM is switched ON. Rear View has higher priority compared to DRVM View.
DRVM function activates when:
-
8” display: Turn the ignition switch ON, press the DRVM button (
) in the display unit.
-
10” display: Turn the ignition switch ON, press the Parking/View button (
) in the console.
-
10” display with SVM (if equipped): Turn the ignition switch ON, press Parking/View button (
) in the console when the vehicle speed is 15 km/h and faster.
You can turn off DRVM function by doing one of the followings:
-
Automatic Transmission/Dual Clutch Transmission/Intelligent Variable Transmission: Change the gear shift lever to "P" (Park).
-
Manual Transmission/Intelligent Manual Transmission: Engage the parking brake.
-
8” display: Press the back button (
) or any hard button in the display unit.
-
10” display: Parking/View button (
) in the console again.
-
10” display with SVM (if equipped): Press Parking/View button (
) in the console again.