Replacing the room lamp (Bulb type)

To replace the room lamp, follow these steps:
P_CD27_D12_044_1_E
P_CD27_D12_065_1_E
  1. Make sure the vehicle is in the OFF position and disconnect the negative 12V battery terminal.
  2. Use a slotted (flat-tip) screwdriver to gently pry the lens cover from the lamp housing.
  3. Pull the bulb straight out of the socket to remove it.
  4. Install a new bulb in the socket.
  5. Align the tabs on the lens cover with the notches in the lamp housing, and lock the lens into the lamp housing.
CAUTION

To avoid finger burns or electric shock, make sure the interior lights are off before you replace one.

NOTE

Be careful not to dirty or damage the lens, lens tab, and plastic housings.