Distributing the sealant

N_CT25F015_E

Operation

  • After injecting the sealant, immediately drive the vehicle at speeds above approximately 20 km/h (12 mph) for about 10 minutes to ensure even distribution of the sealant.

WARNING

  • Do not leave your vehicle running in a poorly ventilated area for extended periods of time. Carbon monoxide poisoning and suffocation can occur.

  • If the tire pressure is below 200 kPa (29 psi), do not drive the vehicle. The tire may cause accident.

CAUTION

  • If the sealant injection hose is not fully connected to the tire valve, the sealant may flow back and block the valve.

  • For your safety, do not exceed a driving speed of approximately 80 km/h (50 mph). If abnormal vibrations or noise occur during driving, reduce speed, park in a safe location. Have your vehicle inspected by a professional workshop. Kia recommends visiting an authorized Kia dealer or service partner.

  • When you use the Tire Mobility Kit, the wheel may be stained by sealant. Therefore, remove the wheel stained by sealant and have your vehicle inspected by a professional workshop. Kia recommends visiting an authorized Kia dealer or service partner.