Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
The following lubricants and fluids are recommended for use in your vehicle:
|
Lubricant |
Volume (L) |
Classification |
|
|---|---|---|---|
|
Engine oil (drain and refill) Recommends 1
![]() |
Except Middle East, Libya, Algeria, Iran, Morocco, Sudan, Tunisia, Egypt |
4.8 |
SAE 0W-20, API SN PLUS/SP or ILSAC GF-6 2
|
|
For Middle East, Libya, Algeria, Iran, Morocco, Sudan, Tunisia, Egypt |
SAE 5W-30, ACEA A5/B5 3
|
||
|
Automatic transmission (AT) fluid 4
|
Smartstream G1.6 T-GDi HEV/PHEV |
6.0 |
SK ATF SP4M-1, MICHANG ATF SP4M-1, S-OIL ATF SP4M-1, or Kia Genuine ATF SP4M-1 |
|
Smartstream G1.6 T-GDi HEV (EURO7) |
5.7 |
||
|
Smartstream G1.6 T-GDi PHEV (EURO7) |
5.4 |
||
|
Engine coolant
|
Smartstream G1.6 T-GDi HEV/PHEV |
Approx. 7.9 |
A Phosphate based ethylene glycol based coolant |
|
Smartstream G1.6 T-GDi HEV/PHEV (EURO 7) |
Approx. 8.6 |
||
|
Water Cooled Intercooler Coolant 5 |
Smartstream G1.6 T-GDi HEV/PHEV (EURO 7) |
Approx. 3.4 |
A Phosphate based ethylene glycol based coolant |
|
Inverter coolant 5 |
Smartstream G1.6 T-GDi HEV |
Approx. 1.9 |
A Phosphate based ethylene glycol based coolant |
|
Smartstream G1.6 T-GDi HEV (EURO 7) |
Approx. 1.38 |
||
|
Smartstream G1.6 T-GDi PHEV |
Approx. 6.8 |
Contact an authorized Kia dealer/service partner |
|
|
Smartstream G1.6 T-GDi PHEV (EURO 7) |
Approx. 7.2 |
||
|
Brake fluid 6
|
As required |
SAE J1704 DOT -4 LV, ISO4925 CLASS-6, FMVSS 116 DOT -4 |
|
|
Rear differential oil (AWD) |
0.53–0.63 |
HYPOID GEAR OIL API GL-5, SAE 75W/85 (Recommended: SK HCT-5 GEAR OIL 75W85 or equivalent) |
|
|
Transfer case oil (AWD) |
0.62–0.68 |
||
|
Fuel |
HEV |
67 |
Gasoline |
|
PHEV |
47 |
||
Refer to Recommended SAE viscosity number.
Requires <API SN PLUS (or above) Full synthetic)> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.
Requires <API SN PLUS (or above) or ACEA A5/B5 Full synthetic > grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.
