Lighting control
The light switch has a headlamp and a position lamp position.
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
-
OFF (O)
-
AUTO
-
Position & Taillamp (
)
-
Low beam (
)
Position & Taillamp
When the light switch is in the position lamp position, the taillamp, position lamp, license plate lamp and cluster light will turn ON.
Headlamp (Low Beam)
When the light switch is in the headlamp position, headlamp (low beam) will turn ON.
The ignition switch or EV button must be in the ON position to turn on the headlamps.
Auto light
When the light switch is in the AUTO light position, the taillamps and headlamps will turn ON or OFF automatically depending on the amount of light outside the vehicle.
-
Never place anything over the sensor (1) located on the instrument panel as this will ensure better auto-light system control.
-
Don't clean the sensor using a window cleaner. The cleaner may leave a light film which could interfere with sensor operation.
-
If your vehicle has window tint or other types of metallic coating on the front windshield, the Auto light system may not work properly.