Automatic release of EPB

The EPB is released automatically under the following conditions.

  • Shifter dial in P (Park)

    With the vehicle ON, depress the brake pedal and shift out of P (Park) to R (Reverse) or D (Drive).

  • Shifter dial in N (Neutral)

    With the vehicle ON, depress the brake pedal and shift out of N (Neutral) to R (Reverse) or D (Drive).

  • Gear

    1. Start the vehicle.

    2. Fasten the driver's seat belt.

    3. Close the driver's door, hood and liftgate.

    4. Depress the accelerator pedal while the shifter dial is in R (Reverse) or D (Drive).

Make sure the brake warning light goes off.

WARNING

  • Never allow a passenger, child, or animal to touch the Electronic Parking Brake.

  • Do not place any objects around the EPB. It may unintentionally operate.

NOTE

  • You can engage the EPB even though the EV button is in the OFF position, but you cannot release it.

  • For your safety, depress the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle.

CAUTION

  • If the parking brake warning light is still on even though the EPB has been released, have the system checked by an authorized Kia dealer.

  • Do not drive your vehicle with the EPB applied. It may cause excessive pad and brake rotor wear.

  • Whenever exiting the vehicle or parking, make sure the gear is shifted to P (Park) position, then apply the parking brake. Block the tires if necessary.

  • EPB may not released as it could freeze in cold weather. Do not use EPB and shift the gear to P (Park), block the tires, and park the vehicle on a flat and road. If the EPB is applied when you shift the gear to P (Park), release the Auto Hold and EPB, and park the vehicle with the tires blocked.

  • When driving with the EPB applied, the brake system may overheat, brake lines may wear, and the EPB may be damaged.

  • When the battery charge is in sufficient, EPB may not be applied or released. Connect to the auxiliary battery.