Starting the diesel engine

Operation

  1. Make sure the parking brake is applied.

  2. Make sure the gear is in P (Park).

  3. Fully depress the brake pedal.

  4. Turn the key to ON position or press the ENGINE START/STOP button. The glow indicator ( ) will illuminate.

  5. If the glow indicator ( ) is turned off, turn the key to START position or fully depress the brake pedal until the engine is started.

NOTE

  • If the engine does not start within 10 seconds after the preheating is completed, turn the ignition key once more to the LOCK position for 10 seconds, and then to the ON position, in order to preheat again.

  • If the engine start/stop button is pressed once more while the engine is pre-heating, the engine may start.