Limitations of Blind-Spot Collision Warning
Blind-Spot Collision Warning may not operate normally as following circumstances. Pay attention while driving.
-
There is inclement weather, such as heavy snow, heavy rain, etc.
-
The rear corner radar is covered with snow, rain, dirt, etc.
-
The temperature around the rear corner radar is high or low
-
The rear corner radar is covered by vehicle or pillar, walls etc.
-
Driving on a highway (or motorway) ramp and tollgate.
-
The road pavement (or the peripheral ground) abnormally contains metallic components (i.e. possibly due to subway construction).
-
There is a fixed object near the vehicle, such as sound barriers, guardrails, double guardrails, central dividers, entry barriers, street lamps, signs, tunnels, walls, etc. (including double structures)
-
Driving through a narrow road where trees or grass are overgrown
-
Driving in areas with few nearby vehicles or structures (desert, grassland, suburbs, etc.)
-
Driving on a wet road surface
-
The other vehicle drives very close behind your vehicle, or the other vehicle passes by your vehicle in close proximity
-
The speed of the other vehicle is very fast that it passes by your vehicle in a short time
-
Your vehicle passes by the other vehicle
-
Your vehicle changes lane
-
Your vehicle has started at the same time as the vehicle next to you and has accelerated
-
The vehicle in the next lane moves two lanes away from you, or when the vehicle two lanes away moves to the next lane from you
-
A trailer or carrier is installed around the rear corner radar
-
The bumper around the rear corner radar is covered with objects, such as a bumper sticker, bike rack, etc.
-
The bumper around the rear corner radar is impacted, damaged or the radar is out of position
-
Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc.
When the following objects are detected:
-
A motorcycle or bicycle is detected
-
A vehicle such as a flat trailer is detected
-
A big vehicle such as a bus or truck is detected
-
A moving obstacle such as a pedestrian, animal, shopping cart or a baby stroller is detected
-
A vehicle with low height such as a sports car is detected

-
Driving on a curved road
Blind-Spot Collision Warning may not operate properly when driving on a curved road. Blind-Spot Collision Warning may not detect the vehicle in the next lane.
Always pay attention to road and driving conditions while driving on a curved road.
ONQ5042035LBlind-Spot Collision Warning may not operate properly when driving on a curved road. Blind-Spot Collision Warning may detect a vehicle in the same lane.
Always pay attention to road and driving conditions while driving.

-
Driving where the road is merging/dividing
Blind-Spot Collision Warning may not operate properly when driving where the road merges or divides. Blind-Spot Collision Warning may not detect the vehicle in the next lane.
Always pay attention to road and driving conditions while driving on the road merges or divides.

-
Driving on an inclined road
Blind-Spot Collision Warning may not operate properly when driving on a sloped road. Blind-Spot Collision Warning may not detect the vehicle in the next lane or may incorrectly detect the ground or structure.
Always pay attention to road and driving conditions while driving on a sloped road.

-
Driving where the heights of the lanes are different
Blind-Spot Collision Warning may not operate properly when driving where the heights of the lanes (underpass joining section, grade separated intersections, etc.) are different. Blind-Spot Collision Warning may not detect the vehicle on a road with different lane heights.
Always pay attention to road and driving conditions while driving where the heights of the lanes are different.
-
When you are towing a trailer or another vehicle, make sure that you turn off Blind-Spot Collision Warning. Control safety may be reduced.
-
Blind-Spot Collision Warning may not operate normally if interfered by strong electromagnetic waves.
-
Blind-Spot Collision Warning may not operate for approximately 3 seconds after the vehicle is started, or rear corner radars are initialized.