Checking the tyre inflation pressure
After driving briefly so as to distribute the sealant in the tyre, check the inflation pressure.
-
After driving approximately 7–10 km (4–6 miles or about 10 minutes), stop at a safe location.
-
Connect the compressor and the tyre connection hose directly to the tyre valve.
N_QVe27_D11_012_E -
Connect the power outlet connector.
-
To check the current tyre pressure, temporarily turn off the compressor:
-
To increase the inflation pressure, switch on the compressor. To check the current inflation pressure setting, briefly switch off the compressor.
-
To reduce the inflation pressure, press the tyre inflation pressure adjustment valve.
-
Do not let the compressor run for more than 10 minutes. Otherwise, the device may overheat and be damaged.
Tyre Pressure Sensor
When you use the TMK with a sealant that is not approved by Kia, the tyre pressure sensors may be damaged by that sealant. When replacing the tyre, remove the approved sealant from the tyre pressure sensor and wheel, and have the tyre pressure sensors inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.
The pressure gauge may show higher than actual reading when the compressor is running. To get an accurate tyre reading, the compressor needs to be turned off.