Indicator lights
Electronic stability control (ESC) indicator light 
-
Once you set the ignition switch or ENGINE START/STOP Button to the ON position.
-
It illuminates for approximately 3 seconds and then goes off.
-
-
When there is a malfunction with the ESC system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
Electronic stability control (ESC) OFF indicator light 
-
Once you set the ignition switch or ENGINE START/STOP Button to the ON position.
-
It illuminates for approximately 3 seconds and then goes off.
-
-
When you deactivate the ESC system by pressing the ESC OFF button.
* For more details, refer to More Details.
immobilizer Indicator Light (Without Smart key) 
-
When the vehicle detects the immobilizer in your key properly while the ignition switch is ON.
-
At this time, you can start the engine.
-
The indicator light goes off after starting the engine.
-
-
When there is a malfunction with the immobilizer system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
immobilizer Indicator Light (With Smart key) 
-
When the vehicle detects the smart key in the vehicle properly while the ENGINE START/STOP Button is ACC or ON.
-
At this time, you can start the engine.
-
The indicator light goes off after starting the engine.
-
-
When the smart key is not in the vehicle.
-
At this time, you can not start the engine.
-
-
When the vehicle can not detect the smart key which is in the vehicle while the ENGINE START/STOP Button is ON.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
-
When the battery of the smart key is weak.
-
At this time, you can not start the engine. However, you can start the engine if you press the ENGINE START/STOP Button with the smart key. (For more details, refer to More Details).
-
-
When there is a malfunction with the immobilizer system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
Turn signal indicator light 
-
When you turn the turn signal light on.
If any of the following occurs, there may a malfunction with the turn signal system. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
-
The indicator light does not blink but illuminates.
-
The indicator light blinks more rapidly.
-
The indicator light does not illuminate at all.
Low beam indicator light
-
When the headlights are on.
High beam indicator light 
-
When the headlights are on and in the high beam position.
-
When the turn signal lever is pulled into the Flash-to-Pass position.
Light ON indicator light 
-
When the tail lights or headlights are on.
Front fog indicator light
-
When the front fog lights are on.
Rear Fog Indicator Light 
-
When the rear fog lights are on.
Glow Indicator Light (for diesel engine) 
-
When the engine is being preheated with the ignition switch or ENGINE START/STOP Button in the ON position.
-
The engine can be started after the glow indicator light goes off.
-
The illumination time varies with the engine coolant temperature, air temperature, and battery condition.
-
If the indicator light remains on or blinks after the engine has warmed up or while driving, there may a malfunction with the engine preheating system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

Engine Preheating
If the engine does not start within 10 seconds after the preheating is completed, set the ignition switch or ENGINE START/STOP Button to the LOCK or OFF position for 10 seconds and then to the ON position in order to preheat the engine again.
Cruise indicator light 
-
When the cruise control system is enabled.
* For more details, refer to More Details.