Using the remote key

Park the vehicle and stop the engine. Arm the system as described below.

  1. Turn off the engine and remove the ignition key from the ignition switch.
  2. Make sure that all doors (and tailgate), the engine bonnet are closed and latched.
  3. Lock the doors by pressing the lock button on the remote key.

    After completion of the steps above, the hazard warning lights will blink once to indicate that the system is armed.

    If any door (and tailgate) or engine bonnet remains open, the hazard warning lights won't operate and theft-alarm will not arm. After this, if all doors (and tailgate) and engine bonnet are closed, the hazard warning lights blink once.