Distributing the sealant

OSV064014

Operation

  • After injecting the sealant, immediately drive the vehicle at speeds above approximately 20 km/h for about 10 minutes to ensure even distribution of the sealant.

WARNING

  • Do not leave your vehicle running in a poorly ventilated area for extended periods of time. Carbon monoxide poisoning and suffocation can occur.

  • If the tyre pressure is below 26 psi (180 kPa), do not drive the vehicle. The tyre may cause accident.

CAUTION

  • If the sealant injection hose is not fully connected to the tyre valve, the sealant may flow back and block the valve.

  • For your safety, do not exceed a driving speed of approximately 80 km/h. If abnormal vibrations or noise occur during driving, reduce speed, park in a safe location, and Call for road side service or towing to an authorised Kia dealer/service partner.

  • When you use the Tyre Mobility Kit, the wheel may be stained by sealant. Therefore, remove the wheel stained by sealant and have the vehicle inspected at a professional workshop. Kia recommends visiting an authorised Kia dealer/service partner.