Blind-Spot Safety
With the ignition switch or ENGINE START/STOP button in the ON position, select or deselect ‘Driver Assistance → Blind-Spot Safety’ from the User Settings menu to set whether or not to use each function.
If ‘Warning Only’ is selected, Blind-Spot Collision Warning will warn the driver with a warning message, an audible warning depending on the collision risk levels.
If ‘Off’ is selected, Blind-Spot Collision Warning will turn off.
When the engine is restarted with Blind-Spot Collision Warning off, the ‘Blind-Spot Safety System is Off’ message will appear on the cluster.
If you change the setting from ‘Off’ to ‘Warning Only’, the warning light on the outside rearview mirror will blink for three seconds.
In addition, if the engine is turned on, when Blind-Spot Collision Warning is set to ‘Warning Only’, the warning light on the outside rearview mirror will blink for three seconds.
If ‘Off’ is selected, the driver should always be aware of the surroundings and drive safely.
If the engine is restarted, Blind-Spot Safety system will maintain the last setting.