Disconnecting the AC charger

  1. To disconnect the charging connector, you must unlock the vehicle doors. The lock system makes it impossible to disconnect the charger cable when the vehicle doors lock.
    NOTE

    To disconnect the charging connector, unlock the doors. The charging connector lock system unlatches. If you do not unlock the doors, you might damage the charging connector and the charging inlet.

  2. Hold the charging connector handle and pull it out.
    OMQ4PHQ013008L

    To prevent charging cable theft, you cannot disconnect the charging connector from the inlet when the doors lock.

    However, if the vehicle is in the charging connector AUTO mode, the charging connector automatically unlocks from the inlet when charging is completed.

    If the connector is not automatically unlocked after charging is completed in AUTO mode, the connector is unlocked when all of the doors are unlocked.

    For more information, refer to AC charging connector lock.

    NOTE

    Do not try to disconnect the charging connector by force while you are not pressing the release button. This might damage the charging connector and the charging inlet.

  3. To close the charging door, press its rear center edge.
    OMQ4PHQ013009L_2

    The charging door does not have a locking system.

NOTE
  • If you cannot open the charging door due to freezing weather, lightly tap or remove any ice near the charging door. Do not try to open the charging door by force. Doing so might damage it.

  • Do not modify or disassemble the charging cable components. This increases the risk of a fire, electric shock, or injury.

  • Keep the charging connector, charging plug, and charging cable clean and dry.

  • To clean foreign substances off the charging connector and the charging plug, use an air gun.