Connecting the AC charger
![]() OMQ4PHQ013013L |
-
Engage the brake pedal and apply the parking brake.
-
Turn OFF all switches, move the shift dial to P (Park), and turn OFF the vehicle.
-
To open the charging inlet door, pressing its rear center edge.
-
Check to make sure there is no dust on the charging connector or the charging inlet.
-
Hold the charging connector handle.
OMQ4PHQ013011LThen, insert the charger into the charging inlet, until you hear a click sound. If it is not fully connected, a bad connection between the charging connector and the charging terminals may cause a fire.
-
Check if the charging cable connection indicator of the high voltage battery in the instrument cluster is turned ON.
WKIA_281Charging does not occur when the indicator is OFF. When the charging connector is not connected properly, reconnect the charging cable to charge.
-
The charging is in progress only with the shift dial is in P (Park). Charging the battery with the ENGINE START/STOP button in the ACC position is possible. However, it may discharge the 12-V battery. Thus, if possible, charge the battery with the ENGINE START/STOP button in the OFF position.
-
Moving the shift dial from P (Park) to R (Reverse)/N (Neutral)/D (Drive) stops the charging process. To restart the charging process, move the shift dial to P (Park), press the ENGINE START/STOP button to the OFF position, and disconnect the charging cable. Then, connect the charging cable.
-
If the charging connector and the charging inlet are not connected properly, the connector might droop or vibrate. If this happens, hold the charging connector handle and push it all the way into the charging inlet.
Charging connector lock mode
When you plug the charging connector into the charging inlet, the timing of the connector lock varies according to the modes you select in the user settings menu or the infotainment system screen’s menu.
-
Always lock: The connector locks when you plug the charging connector into the charging inlet.
-
Lock while charging: The connector locks when charging starts. The connector unlocks when charging completes.
For more information, refer to AC charging connector lock.
