Connecting the portable charging cable (ICCB: In-Cable Control Box) (Type A)
-
Turn OFF all switches, move the shift dial to P (Park), and turn OFF the vehicle.
-
Connect the ICCB plug to a household electrical outlet.
OMQ4PHQ013050LNOTE-
When connecting the ICCB charging plug to an outlet, connect it to an outlet that is grounded.
-
If the outlet does not have a grounding terminal, have a qualified technician install a grounding terminal and then connect the plug.
-
-
Check to make sure the power connection indicator light (green) illuminates in the control box.
OCDPQ019051 -
Engage the brake pedal and apply the parking brake.
-
To open the charging inlet door, pressing its rear center edge.
OMQ4PHQ013013L -
Check to make sure there is no dust on the charging connector or the charging inlet.
-
Hold the charging connector handle.
OMQ4PHQ013011LFigure 1. Vehicle connection
OCDPQ019052Then, insert it into the charging inlet, until you hear a click sound. If it is not fully connected, improper connection between the charging connector and the charging terminals are a potential fire hazard.
-
Charging starts automatically and the charging light blinks.
OCDPQ019053 -
Check if the charging cable connection indicator of the high voltage battery in the instrument cluster is turned ON.
OMV053214Charging does not occur when the indicator is OFF. When the charging connector is not connected properly, reconnect the charging cable to charge.
NOTE-
The charging is in progress only with the shift dial is in P (Park). Charging the battery with the ENGINE START/STOP button in the ACC position is possible. However, it may discharge the 12-V battery. Thus, if possible, charge the battery with the ENGINE START/STOP button in the OFF position.
-
Moving the shift dial from P (Park) to R (Reverse)/N (Neutral)/D (Drive) stops the charging process. To restart the charging process, move the shift dial to P (Park), press the ENGINE START/STOP button to the OFF position, and disconnect the charging cable. Then, connect the charging cable and restart the charging process.
-
-
After charging starts, the estimated charging time displays in the instrument cluster for about 1 minute. Estimated charging time also displays when the driver side door is open while charging is in progress. When you set scheduled charging, the estimated charging time displays as “--”.
OMVQ013068N