Lighting control

The light switch has a headlight and a position lamp setting.

Figure 1. Type A
ODL3H033004L
Figure 2. Type B
ODL3033402L

To operate the lights, turn the knob at the end of the control lever to one of the following settings:

  1. OFF /O position

  2. AUTO

  3. Position & Tail lamp

  4. Headlight position

Position & Tail lamp

ODL3H033005L

When the light switch is in the position lamp position, the front position lamp, taillamp, and the license plate lamp will turn ON.

Head light (Low Beam)

ODL3H033006L

When the light switch is in the head light position, head light (low beam), tail, license light will turn ON.

NOTE

The ignition switch or ENGINE START/STOP button must be in the ON position to turn on the headlights.

AUTO light

OMQ4PH034017L_2

When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle.

CAUTION
  • For optimal AUTO light setting performance, never place anything over the sensor (1) located on the instrument panel.

  • Don't clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.

  • If your vehicle has a window tint or other metallic coating on the front windshield, the AUTO light system may not work properly.