Starting and stopping the engine for turbocharger intercooler

  1. Do not race or accelerate the vehicle immediately after you start the engine.

    If the engine is cold, idle for several seconds before sufficient lubrication is ensured in the turbocharger unit.

  2. After high speed or extended driving, requiring a heavy engine load, idle the engine about 1 minute before turning it off.

    This idle time allows the turbocharger to cool before you turn OFF the engine.

CAUTION

Do not turn OFF the engine immediately after you have subjected it to a heavy load. Doing so may cause severe damage to the engine or turbocharger unit.

CAUTION

If the engine stalls while you are in motion, do not attempt to shift the gear to the P (Park) position. If traffic and road conditions permit, you may put the gear in the N (Neutral) position while the vehicle is still moving and turn the ignition switch to the START position in an attempt to restart the engine.

CAUTION
  • Do not engage the starter for more than 10 seconds. If the engine stalls or fails to start, wait 5 to 10 seconds before re-engaging the starter. Improper use of the starter may damage it.

  • Do not turn the ignition switch to the START position with the engine running. It may damage the starter.