Operating conditions
Basic function
Smart Cruise Control operates under the following conditions:
-
The gear is in D (Drive).
-
Your speed is within the operating range:
-
10–180 km/h (5–110 mph): when there is no vehicle in front
-
0–180 km/h (0–110 mph): when there is a vehicle in front
-
-
Electronic Stability Control (ESC) or Anti-lock Braking System (ABS) is ON.
Smart Cruise Control does not operate in the following conditions.
-
The driver’s door is open.
-
Engine RPM is high.
-
EPB (Electronic Parking Brake) is applied
-
ESC or ABS is controlling the vehicle.
-
Forward Collision-avoidance Assist brake control is operating
-
Remote Smart Parking Assist brake control is operating (if equipped).
-
When Idle Stop and Go (ISG) system is operated
When stopped behind another vehicle, the driver can turn on Smart Cruise Control while the brake pedal is depressed.
Overtaking Acceleration Assist function
Overtaking Acceleration Assist operates when you turn the turn signal indicator ON to the left (left-hand drive) or the right (right-hand drive) while Smart Cruise Control is operating under the following conditions:
-
Your driving speed is above 60 km/h (40 mph)
-
A vehicle is detected in front of your vehicle
Overtaking Acceleration Assist does not operate under the following conditions:
-
The hazard lights are ON.
-
Vehicle speed is reduced to maintain distance with the vehicle in front
-
When the turn signal indicator is turned on to the left (left-hand drive) or turned on to the right (right-hand drive) while there is a vehicle ahead, the vehicle may accelerate temporarily. Pay attention to the road conditions at all times.
-
Regardless of your country’s driving direction, Overtaking Acceleration Assist will operate when the conditions are satisfied. When using the function in countries with different driving direction, always check the road conditions at all times.