Jump starting
Connect the cables in the numerical order shown in the following image (and disconnect them in the reverse order):
![]() OMQ4063003 |
Jump-starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow these jump-starting procedures. If in doubt, we strongly recommend that you have a competent technician or towing service jump-start your vehicle.
Use only a 12-volt jumper system. You can damage a 12-volt starting motor, ignition system, and other electrical parts beyond repair by using a 24-volt power supply (either 2 12-volt batteries in a series or a 24-volt motor generator set).
Battery
Never attempt to check the electrolyte level of the battery. This might cause the battery to rupture or explode, resulting in serious injury.
Battery
-
Keep all flames or sparks away from the battery. The battery produces hydrogen gas, which may cause an explosion if it is exposed to flame or sparks.
If you do not follow these instructions exactly, serious personal injury and damage to the vehicle may occur. If you are not sure how to follow this procedure, seek qualified assistance. Automobile batteries contain sulfuric acid, which is poisonous and highly corrosive. When jump starting your vehicle, wear protective glasses and be careful not to get acid on yourself, your clothing, or the vehicle.
-
Do not attempt to jump start the vehicle if the discharged battery is frozen or the electrolyte level is low. The battery may rupture or explode.
-
Do not allow the (+) and (-) jumper cables to touch. This might cause sparks.
-
The battery may rupture or explode when you jump start with a low or frozen battery.
