Removing and storing the spare tire
The spare tire is stored underneath your vehicle directly below the cargo area.
To remove the spare tire from storage, follow these steps:
-
Open the tailgate.
-
Find the spare tire fixing bolt cover and remove the cover.
If necessary, separate the tool case only after removing the clamp.
Figure 1. Hybrid vehicle
OMQ4063032LFigure 2. Plug-in hybrid vehicle
OMQ4PH064001N -
Connect the socket and wheel lug nut wrench.
-
Use the wheel lug nut wrench to loosen the bolt enough to lower the spare tire.
Turn the wrench counterclockwise until the spare tire reaches the ground.
OMQ4063033L -
After the spare tire reaches the ground, continue to turn the wrench counterclockwise, and draw the spare tire outside. Never rotate the wrench excessively, otherwise the spare tire carrier may be damaged.
-
Remove the retainer (1) from the center of the spare tire.
OMQ4063035L
To store the spare tire, follow these steps:
-
Lay the tire on the ground with the valve stem facing up.
-
Place the wheel under the vehicle and install the retainer through the wheel center.
OMQ4063034L -
Turn the wrench clockwise until it clicks.
Ensure the spare tire retainer is properly aligned with the center of the spare tire to prevent the spare tire from “rattling”.
Otherwise, it may cause the spare tire to fall off the carrier and lead to an accident.