3-point system with emergency locking retractor: (if equipped)
Operation
-
Insert the metal tab into the buckle.
-
Press the release button in the locking buckle.
-
There will be an audible "click" when the tab locks into the buckle.
-
Rear right seat belt fastening buckle
-
Rear center seat belt fastening buckle (with the " CENTER" mark)
-
Rear left seat belt fastening buckle
-
You should place the lap belt portion as low as possible and snugly across your hips, not on your waist. If the lap belt is located too high on your waist, it may increase the chance of injury in the event of a collision. Both arms should not be under or over the belt. Rather, one should be over and the other under, as shown in the illustration. Never wear the seat belt under the arm near the door.
-
Prior to fastening the rear seat belts, ensure the latch matches the seat belt buckle. Forcefully fastening the left or right seat belt to the center buckle can result in an improper fastening scenario that will not protect you in an accident.
Do NOT fold down the left portion of the rear seatback when the rear center seat belt is buckled. ALWAYS UNBUCKLE the rear center seat belt before folding down the left portion of the rear seatback. If the rear center seat belt is buckled when the left portion of the rear seatback is folded down, distortion and damage to the top portion of the seatback and seat belt garnish may result, causing the seatback to lock into the folded down position.