Turning on Highway Lane Change Assist
OMQ4053151L

A: Press OK button to enable Lane Change Assist

While Highway Lane Change Assist function is on, the function will be ready to operate when all the following conditions are satisfied:

  • Highway Driving Assist is operating

  • Lane Following Assist is operating

  • A vehicle behind your vehicle is detected more than once after your vehicle is turned on

  • Your driving speed is above 20 mph (30 km/h)

  • When driving at low speeds (20–40 mph (30–60 km/h)), your vehicle can only be operated if vehicles in the left and right adjacent lanes are recognized, and there is no risk of collision when changing lanes.

  • Hands-off warning is not displayed on the instrument cluster

  • Hazard warning flasher is off

NOTE

  • While Lane Change Assist function is turned on (indicator on), Lane Following Assist will not cancel even if the turn signal indicator or hazard warning flasher is operating.

  • Lane Change Assist function turns off automatically when driven in the following road conditions:

    • One driving lane

    • Roads lacking physical center separation structures (such as guardrails)

    • There is a pedestrian or cyclist on the road ahead

  • If the driving speed slows down to less than 15 mph (25 km/h) when it is in ready state, it will change to standby state.

  • When driving at low speeds (20–40 mph (30–60 km/h)), the vehicle will change to standby state if it is not recognized by vehicles in the left and right adjacent lanes.

  • If a risk of collision is detected, the system will change to standby state.

  • The images or colors may be displayed differently depending on the specifications of the instrument cluster or theme.

  • Lanes and surrounding objects displayed within a cluster may differ from actual ones.

WARNING

When Highway Lane Change Assist function turns off while operating, steering assist will be temporarily canceled. Always be cautious while driving.