Vehicle malfunctions or non-operating conditions

Malfunction

Operation

If the vehicle stalls while driving

  1. Reduce your speed and keep straight.

  2. Stop the vehicle in a safe place.

  3. Turn the hazard warning flasher on.

  4. Restart the vehicle.

If the vehicle stalls at a crossroad or crossing

  1. Shift to N (Neutral).

  2. Push the vehicle to a safe place.

If you have a flat tire while driving

  1. Reduce your speed slowly and keep straight.

  2. Stop the vehicle in a safe, level place away from traffic.

  3. Turn the hazard warning flasher on.

  4. Set the parking brake.

  5. Shift to P (Park).

  6. Have all passengers get out of the vehicle and move away from traffic.

Refer to Tire Mobility Kit .

If the vehicle will not start

  • Be sure P (Park) gear position is selected. The vehicle starts only when P (Park) gear position is selected.

  • Check the 12-volt battery connections to be sure they are clean and tight.

  • Turn on the interior light. If the light dims or goes out when you operate the starter, the 12V battery is drained.