Indicator lights
Electronic Stability Control (ESC) Indicator Light 
-
Once you set the ignition switch or ENGINE START/STOP button to the ON position.
-
It appears for approximately 3 seconds and then goes off.
-
-
When there is a malfunction with the ESC system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Whilst the ESC is operating.
* For more details, refer to More Details.
Electronic Stability Control (ESC) OFF Indicator Light 
-
Once you set the ignition switch or ENGINE START/STOP button to the ON position.
-
It appears for approximately 3 seconds and then goes off.
-
-
When you deactivate the ESC system by pressing the ESC OFF button.
* For more details, refer to More Details.
Auto stop indicator 
(if equipped)
This indicator will appear when the engine enters the Idle Stop mode of ISG (Idle Stop and Go) system.
When the automatic starting occurs, the auto stop indicator on the cluster will blink for 5 seconds.
* For more details, refer to More Details.
When the engine automatically starts by ISG system, some warning lights (ABS, ESC, ESC OFF, EPS or Parking brake warning light) may turn on for a few seconds. This happens because of the low battery voltage. It does not mean the system is malfunctioning.
AUTO HOLD Indicator Light (AUTO HOLD) 
(if equipped)
-
White When you activate the auto hold system by pressing the AUTO HOLD button.
-
Green When you stop the vehicle completely by depressing the brake pedal with the auto hold system activated.
-
Yellow When there is a malfunction with the auto hold system. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
* For more details, refer to More Details.
Immobiliser Indicator Light (Without Smart Key) 
-
When the vehicle detects the immobiliser in your key properly whilst the ignition switch is ON.
-
At this time, you can start the engine.
-
The indicator light goes off after starting the engine.
-
-
When there is a malfunction with the immobiliser system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Immobiliser Indicator Light (With Smart Key)
-
When the vehicle detects the smart key in the vehicle properly whilst the ENGINE START/STOP button is ACC or ON.
-
At this time, you can start the engine.
-
The indicator light goes off after starting the engine.
-
-
When the smart key is not in the vehicle.
-
At this time, you can not start the engine.
-
-
When the vehicle can not detect the smart key which is in the vehicle whilst the ENGINE START/STOP button is ON.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
-
When the battery of the smart key is weak.
-
At this time, you can not start the engine.However, you can start the engine if you press the ENGINE START/STOP button with the smart key. (For more details, refer to More Details, More Details).
-
-
When there is a malfunction with the immobiliser system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Turn Signal Indicator Light 
-
When you turn the turn signal light on.
If any of the following occurs, there may a malfunction with the turn signal system. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
-
The indicator light does not blink but appears.
-
The indicator light blinks more rapidly.
-
The indicator light does not appear at all.
-
Low Beam Indicator Light 
-
When the headlights are on.
High Beam Indicator Light 
-
When the headlights are on and in the high beam position.
-
When the turn signal lever is pulled into the Flash-to-Pass position.
High Beam Assist indicator 
(if equipped)
-
When the high beam is on with the light switch in the AUTO light position.
-
If your vehicle detects oncoming or preceding vehicles, the high beam assist will switch the high beam to low beam automatically.
* For more details, refer to More Details.
Light ON Indicator Light 
-
When the tail lights or headlights are on.
Front Fog Indicator Light 
(if equipped)
-
When the front fog lights are on.
Rear Fog Indicator Light 
-
When the rear fog lights are on.
Glow Indicator Light (Diesel Engine) 
(if equipped)
-
When the engine is being preheated with the ignition switch or ENGINE START/STOP button in the ON position.
-
The engine can be started after the glow indicator light goes off.
-
The illumination time varies with the engine coolant temperature, air temperature, and battery condition.
-
If the indicator light remains on or blinks after the engine has warmed up or whilst driving, there may a malfunction with the engine preheating system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Engine Preheating
If the engine does not start within 10 seconds after the preheating is completed, set the ignition switch or ENGINE START/STOP button to the LOCK or OFF position for 10 seconds and then to the ON position in order to preheat the engine again.
Lane Safety indicator light 
(if equipped)
Lane Safety indicator will appear when you turn Lane Keeping Assist on by pressing the Lane Safety button.
If there is a problem with Lane Keeping Assist, the yellow Lane Safety indicator will appear.
* For more details, refer to More Details.
Icy Road Warning Light 
(if equipped)
-
This warning light is to warn the driver the road may be icy.
When the temperature on the outside temperature gauge is approximately below 4°C (39°F), the Icy Road Warning Light and Outside Temperature Gauge blinks and then appears. Also, the warning chime sounds 1 time.
If the icy road warning light appears whilst driving, you should drive more attentively and safely, refraining from over-speeding, rapid acceleration, sudden braking or sharp turning, etc.