Trip information (trip computer)

The trip computer is a microcomputer- controlled driver information system that displays information related to driving.

NOTE

Some driving information stored in the trip computer resets if the battery is disconnected.

Trip Modes

OQYi042379R

*: if equipped

To change the trip mode, scroll the toggle the switch ( / ) on the steering wheel.

Fuel economy

Average Fuel Economy (1)
OSP2I049115

  • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy reset.

    • Fuel economy range: 0~99.9 km/L, L/100 km or MPG

  • The average fuel economy can be reset both manually and automatically.

NOTE

The average fuel economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 50 metres (0.03 miles) since the ignition switch or ENGINE START/STOP button is turned to ON.

Instant Fuel Economy (2)

  • This mode displays the instant fuel economy during the last second when the vehicle speed is more than 10 km/h (6.2 mph).

    • Fuel economy range:

      0~30 km/L, L/100 km or 0~50 MPG

Accumulated driving information mode

This display shows the accumulated trip distance (1), the average fuel efficiency (2), and the total driving time (3).

OSP2I049114

  • Accumulated information is calculated after the vehicle has run for more than 300 metres.

  • If you press "OK" button for more than 1 second after the Cumulative Information is displayed, the information will be reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

Drive Info display

This display shows the trip distance (1), the average fuel efficiency (2), and the total driving time (3) information once per one ignition cycle.

OQYi042124

  • Fuel efficiency is calculated after the vehicle has run for more than 300 metres.

  • The Driving Information will be reset 4 hours after ignition has been turned off. So, when the vehicle ignition is turned on within 4 hours, the information will not be reset.

  • If you press "OK" button for more than 1 second after the Driving Information is displayed, the information will be reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.