Park and stop the vehicle. Arm the system as described below.

1. Change the START/STOP button to the OFF position

2. Make sure that all doors, the bonnet and tailgate are closed and latched.

3. Lock the doors by pressing the button of the front outside door handle with the smart key in your possession.

   After completion of the steps above, the hazard warning lights will operate once to indicate that the system is armed.

   If the tailgate or bonnet remains opened, the hazard warning lights will not operate and theft-alarm will not arm. After this, if the tailgate and bonnet are closed, the hazard warning lights will blink once and the theft-alarm will arm.

• Lock the doors by pressing the lock button on the smart key.

  After completion of the steps above, the hazard warning lights will operate once to indicate that the system is armed.

  If the tailgate or bonnet remains opened, the hazard warning lights will not operate and theft alarm will not arm. After this, if the tailgate and bonnet are closed, the hazard warning lights will blink once and the theft-alarm will arm.

Do not arm the system until all passengers have left the vehicle. If the system is armed whilst a passenger(s) remains in the vehicle, the alarm may be activated when the remaining passenger(s) leaves the vehicle. If any door (or tailgate) or bonnet is opened within 30 seconds after the system enters the armed stage, the system will be disarmed to prevent unnecessary alarm.