Search by Title only
Home > Driving your vehicle > Manual Speed Limit Assist (MSLA)

Manual Speed Limit Assist (MSLA) (if equipped)

You can set the speed limit when you do not want to drive over a specific speed.

If you drive over the preset speed limit, the warning function operates (set speed limit will blink and chime will sound) until the vehicle speed returns within the speed limit.

NOTICE

Whilst speed limit control is in operation, Cruise Control cannot be activated.

To set speed limit :

  1. Press the Driving Assist button twice on the steering wheel, to turn the function on.

The speed limit indicator light will illuminate.

  1. Push the SET- button.

  2. Push the RES+ button or the SETbutton, and release it at the desired speed. Push the RES+ button or the SET- button and hold it. The speed will increase or decrease by 5 km/h (3 mph).

Push the RES+ button or the SETbutton and release it immediately. The speed will increase or decrease by 1 km/h.

The set speed limit will display on the instrument cluster.

The set speed limit will be displayed.

To drive over the preset speed limit you must depress hard on the accelerator pedal (more than approximately 80%) until the kick down mechanism works with a clicking noise. Then the set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

NOTICE
  • Depressing the accelerator pedal less than approximately 50%, the vehicle will not speed over the preset speed limit but maintain the vehicle speed within the speed limit.

  • A clicking noise heard from the kick down mechanism by depressing the accelerator pedal fully is a normal condition.

To turn off Manual Speed Limit Assist, do one of the following:

  • Press the Driving Assist button.

  • Turn the vehicle off.

If you press the cancel O switch once, the set speed limit will cancel, but it will not turn the function off. If you wish to reset the speed limit, push the RES+ button or the SETbutton to the desired speed.

CAUTION

The “---” indicator will blink if there is a problem with speed limit control function.

In this case, have the function checked by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.