Resetting reverse parking aid user settings mode

If you want to change the automatic control function of rearview mirrors to factory-default conditions, follow the steps below.

  1. Shift the shift lever to P (Park).

  2. Position the lever to L (left) or R (right) according to the mirror you want to adjust.

  3. Engage the brake pedal and set the shift lever to R (Reverse).

  4. When the downward movement of the rear view mirror is finished, press the switch (▲) to locate the mirror in the position higher than before (P, N or D).

    (Adjust the mirror in the higher position compared to its position in the driving mode)

  5. Move the gear to a position other than R (Reverse) or change the rearview mirror selector lever to the neutral position. (The default settings will be applied from the next operation)

  6. You can initialize settings for the mirror on the other side by following the same procedures (1–5).

NOTE

Follow these procedures in an orderly manner to change or initialize the auto reversing user settings.

If you move to the next step before completing the previous one, the changed angle may not be changed or initialization may not work properly.