Search by Title only
Home > Features of your vehicle > LCD display > LCD display modes

LCD display modes

View

Description

Driving Assist view

Displays information related to Driver assistance system

Navigation view

Displays information related to navigation system

Utility information view

Displays information related to driving, warning, etc.

Fuel economy

This information is always displayed at the bottom center of the Full LCD cluster.

  1. Average energy economy

  2. Instant energy economy

Average Fuel Economy (1)

  • The average fuel economy is calculated by the total driving distance and fuel consumption since the last average fuel economy resets.

    • Fuel economy range: 0-99.9 MPG or km/L, L/100 km

NOTICE

The average fuel economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 0.03 mi (50 m) since the ENGINE START/STOP button is turned to ON.

Instant Fuel Economy (2)

  • This mode displays the instant fuel economy during the last few seconds when the vehicle speed is more than 6.2 mph (10 km/h).

    • Fuel economy range:

      0.0-30 km/L, L/100 km or 0.0-50.0 MPG

Driving assist view

This mode displays the state of:

  • Lane Keeping Assist

    Smart Cruise Control (if equipped)

    Navigation-based Smart Cruise Control (if equipped)

    Lane Following Assist

    Highway Driving Assist (if equipped)

* For more details, refer to each system information in More Details.

Navigation view

This mode displays the state of the navigation.

Utility information view

Low tire pressure warning display

A: Tire pressure

Information related to tire pressure

* For more details, refer to each system information in More Details.

Drive info display

This display shows the trip distance (1), the average fuel efficiency (2), and the total driving time (3) information once per one ignition cycle.

A: Current Trip

  1. Trip

  2. Timer

  3. Avg.

  • Fuel efficiency is calculated after the vehicle has run for more than 0.19 miles (300 m).

  • The information will automatically reset when the driver's door is opened after the vehicle is turned off, or approximately 3 minutes have passed after the vehicle is turned off.

  • If you press "OK" button for more than approximately 1 second after the Driving Information is displayed, the information will be reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

NOTICE

The vehicle must be driven for a minimum of 0.19 miles (300 m) since the last ignition cycle before the average accumulated driving information is recalculated.

Information since refueling

This display shows the trip distance, the average fuel efficiency, and the instant fuel efficiency (or the total driving time) since refueling.

A: Since Refueling

  1. Trip

  2. Timer

  3. Avg.

  • Information since refueling is calculated after the vehicle has run for more than approximately 0.19 miles (300 m).

  • If you press "OK" button for more than 1 second after the information since refueling is displayed, the information will be reset.

  • When driving after refueling, the information will be automatically reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

NOTICE

The vehicle must be driven for a minimum of 0.19 miles (300 m) since the last ignition cycle before the average accumulated driving information is recalculated.

Accumulated driving information mode

This display shows the accumulated trip distance, the average fuel efficiency, and the total driving time.

A: Since Last Reset

  1. Trip

  2. Timer

  3. Avg.

  • Accumulated information is calculated after the vehicle has run for more than 0.19 miles (300 m).

  • If you press "OK" button for more than 1 second after the Cumulative Information is displayed, the information will be reset.

  • If the engine is running, even when the vehicle is not in motion, the information will be accumulated.

Energy flow

The hybrid system informs the driver about its energy flow in various operating modes. While driving, the current energy flow is specified in 11 modes.

* For more details, refer to More Details.

Engine coolant temperature

A: Engine temperature

This gauge indicates the temperature of the engine coolant when the engine is running.

NOTICE

If the gauge indicator is of the normal range, toward the "130 or H (Hot)" position, it indicates overheating of the engine. It may damage the engine. Do not continue driving with an overheated engine.

Other view modes

Service mode

This mode reminds you of scheduled maintenance information.

A: Service Interval

Service Interval

It calculates and displays when you need a scheduled maintenance service (mileage or days).

If the remaining mileage or time reaches 900 miles (1,500 km) or 30 days, "Service interval" message is displayed for several seconds each time you set the ENGINE START/STOP button to the ON position.

Service required

If you do not have your vehicle serviced according to the already inputted service interval, "Service required" message is displayed for several seconds each time you set the ENGINE START/STOP button to the ON position.

To reset the service interval to the mileage and days you inputted before:

  • Press the OK button (Reset) for more than 1 second.

NOTICE

If any of the following conditions occurs, the mileage and days may be incorrect.

  • The battery connector is disconnected.

  • The battery is discharged.

Master warning mode

This mode informs you of the following situations:

  • Driver assistance system malfunction, limitation or radar/camera blockage (if equipped)

  • LED headlamp malfunction

  • Lamp malfunction

  • TPMS (Tire Pressure Monitoring System) failure, low tire pressure, etc.

The Master Warning icon () will appear. If the situation re solves, the master warning light will turn off and the Master Warning icon will disappear.