Digital center mirror: (if equipped)
The digital center mirror system uses the vehicle’s rear camera and displays its image on the screen of the digital center mirror. The digital center mirror ensures rear visibility by allowing the driver to see the rear view despite obstructions, such as headrests or luggage.
-
Failure to follow the warnings and instructions for proper use of the Digital Center Mirror could result in a serious accident.
-
The Digital Center Mirror is a convenience feature, not a substitute for proper vehicle operation. The system has blind spots where objects are not visible. Check the blind spot of the Digital Center Mirror before operating the vehicle. The driver is always responsible for safe driving.
-
Do not operate the Digital Center Mirror while driving. Operating the Digital Center Mirror while driving can be a distraction and cause a loss of control of your vehicle, an accident, or a serious injury.
-
Do not disassemble or modify the Digital Center Mirror, the camera unit or wirings. If you do, it may result in accidents or fire. In case you notice smoke or smell coming from the Digital Center Mirror, stop using the system immediately. Have the system inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
-
-
Adjust the Digital Center Mirror before driving.
-
Switch the system to the conventional rearview mirror mode while properly seated in the driver’s seat. Then adjust the mirror so you can properly see out of the rear window.
-
To switch to digital mirror mode and adjust the display settings, push the lever all the way. Driving without adjusting the mirror might cause difficulty in seeing the display of the digital mirror mode (camera view mode) due to the reflection from the surface of the mirror.
-
Because the range of the Digital Center Mirror’s image display is different from that of the optical mirror, make sure to check the range.
-
-
If the Digital Center Mirror malfunctions, immediately switch to the conventional rearview mirror mode.
-
When strong light (such as sunlight or the high beams of a following vehicle) impacts the camera, a light beam or a glaring light might appear on the monitor screen of the Digital Center Mirror. In this case, switch to the conventional rearview mirror mode.
-
If the camera lens (1) is dirty, the displayed image might be unclear. In this case, clean the camera lens with a swab or a soft cloth dampened with water.
OMQ4033059