Changing the mode
The mode can be switched when the switch is in the ON position.
![]() OMV033427_2 |
-
Pull the mode select lever to completely switch to digital center mirror mode (1) (camera view mode).
Displays an image of the area behind the vehicle. In this mode, camera indicator is shown.
-
Push the mode select lever to completely switch to optical inside rearview mirror mode (2).
Turns off the display of the Digital Center Mirror allows it to be used as an optical mirror.
Adjusting the mirror height
![]() OMV033428 |
You can adjust the height of the rearview mirror to suit your driving posture.
To adjust the angle of the rearview mirror, change to optical mirror mode and move the rearview mirror up or down.
Display settings (digital mirror mode)
![]() OMV033439 |
-
To display the icons, press the menu button (1).
Icons
Settings

Select to adjust the brightness of the display.

Select to adjust the display up or down.
-
Press the menu button (1) repeatedly and select the item you want to adjust.
-
Press the button (2) or button (3) to change the setting.
The icons will disappear if you do not press the button for approximately 5 seconds or more.
Setting the brightness of the Digital Center Mirror too high might cause eye strain.
Adjust the Digital Center Mirror to an appropriate brightness. If your eyes become tired, change to optical mirror mode.
![]() OMV033429 |
![]() OMV033448 |
To prevent the light sensors from malfunctioning, do not touch or cover the sensors.
Digital mirror mode operating conditions
The ENGINE START/STOP button is in the ON position. When the ENGINE START/STOP button is changed ignition switch LOCK /OFF or ACC position, the image will be disappeared.
When using the digital center mirror in digital mirror mode
-
The Digital Center Mirror image might not display properly when the tailgate is open. Before driving, make sure that the tailgate is closed.
-
If the display is difficult to see due to reflected light, close the sunshade or the sunroof.
-
When driving in the dark, any of the following might occur (and do not indicate a malfunction):
-
Colors of objects in the display image might differ from their actual color.
-
Focusing on the display image might take longer than usual depending on your physical condition and age. If focusing is difficult, switch to optical mirror mode.
-
Do not allow passengers to stare at the image display when you are driving the vehicle, as doing so might cause motion sickness.
-
When the system malfunctions
![]() OMV033440 |
If the symbol shown in the illustration is displayed when using the Digital Center Mirror in digital mirror mode, the system may be malfunctioning. The symbol will disappear in a few seconds. Operate the lever, change to optical mirror mode and have the vehicle inspected by an authorized Kia dealer/service partner.
-
To prevent the Digital Center Mirror from malfunctioning.
-
Do not clean the mirror with detergents such as thinner, benzene, or alcohol. These detergents might discolor, deteriorate, or damage the surface of the mirror.
-
Do not remove, disassemble, or modify the mirror or the camera.
-
Do not allow an organic solvent, vehicle wax, window cleaner, or glass coating to adhere to the camera. If this happens, wipe it off as soon as possible.
-
To clean the camera lens, wipe the lens with a damp soft cloth.
-
Do not aggressively rub the camera lens, as doing so might scratch the lens, in which case it cannot transmit a clear image.
-
Do not subject the camera to a strong impact, as this could cause a malfunction. If this happens, have the vehicle inspected by an authorized Kia dealer or service partner as soon as possible.
-
Operating the system at the ON position while the vehicle is not running would cause discharging of the battery.
-
Do not attach an antenna of a wireless device near the Digital Center Mirror. Electric waves from a wireless device might disturb the image that the Digital Center Mirror displays.
-
Do not push buttons excessively or operate the lever in a rough manner, as this might cause a system failure or cause the Digital Center Mirror to drop.
-
Never rotate the body of the Digital Center Mirror by 90° or more. This might damage the Digital Center Mirror. Do not apply strong shocks to the body of Digital Center Mirror, as strong shocks might cause a system failure.
-
If a strong external light makes it difficult to see the Digital Center Mirror display, switch to the conventional rearview mirror mode.
Digital Center Mirror error icons and solutions
|
Symptom |
Likely cause |
Solution |
|---|---|---|
|
The high temp icon ( |
The Digital Center Mirror is extremely hot. The display gradually dims. If the temperature continues to increase, the Digital Center Mirror turns off. |
To reduce the temperature of the mirror, reduce the cabin temperature. The icon will disappear when the mirror becomes cool. If the icon does not disappear even though the mirror is cool, have the vehicle inspected by an authorized Kia dealer/service partner. |
|
The display icon changes to (the display error icon). |
The system might be malfunctioning. |
Change to optical mirror mode and have the vehicle inspected by an authorized Kia dealer/service partner. |





