How to initialize auto reverse user settings
If you want to change the automatic control function of rearview mirrors to factory-default conditions, follow the steps below.
-
Position the shift dial to P (Park). Make sure that the vehicle is stopped and the mirror is not working.
-
Position the lever to L (left) or R (right) according to the mirror you want to adjust.
-
Step on the brake pedal and turn the shift dial to R (Reverse).
-
When the downward movement of the rearview mirror is finished, press the switch ▲ to locate the mirror in the position higher than before (P, N or D).
(Adjust the mirror in the higher position compared to its position in the driving mode)
-
It is initialized when the shift dial is changed to a position other than R (Reverse), or the rearview mirror selector lever is changed to the neutral position. (Initialized position will be applied from next operation)
-
Follow the same procedure to initialize settings for the rearview mirror on the other side of the vehicle.
We recommend following the procedures in an orderly manner to change or initialize the auto reversing user settings.
If you move to the next step before completing the previous one, the changed angle may not be changed or initialization may not work properly