High Beam Assist operation

  • After selecting 'High Beam Assist' in the Settings menu, High Beam Assist will operate by following the procedure below.

    • Place the headlamp switch in the AUTO position and push the headlamp lever towards the instrument cluster. The High Beam Assist () indicator light will appear on the cluster and the function will be enabled.

    • When the function is enabled, high beam will turn on when vehicle speed is above 30 km/h (20 mph). When vehicle speed is below 20km/h (12 mph), high beam will not turn on.

    • The high beam () indicator light will appear on the cluster when the high beam is on.

  • When High Beam Assist is operating, if the headlamp lever or switch is used, the function operates as follow:

    • If the headlamp lever is pulled towards you when the high beam is off, the high beam will turn on without High Beam Assist canceled. When you let go of the headlamp lever, the lever will move to the middle and the high beam will turn off.

    • To turn the high beam on and cancel HBA, push the light switch toward the instrument cluster.

    • If the headlamp switch is placed from AUTO to another position (headlamp/position/off), High Beam Assist will turn off and the corresponding lamp will turn on.

  • When High Beam Assist is operating, the high beams switch to the low beams under any of the following conditions:

    • When the headlamp of an oncoming vehicle is detected.

    • When the tail lamp of a vehicle in front is detected.

    • When the headlamp or tail lamp of a motorcycle or a bicycle is detected.

    • When the surrounding ambient light is bright enough that high beams are not required.

    • When streetlights or other lights are detected.