Replacing map lamp (Bulb type)

OMQ4073126L
WARNING

Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.

  1. Press the ENGINE START/STOP button in the OFF position and disconnect the battery’s negative (-) terminal.

  2. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.

  3. Pull the bulb straight out of the socket to remove it.

  4. Install a new bulb in the socket.

  5. Align the tabs on the lens cover with the notches in the lamp housing, and lock the lens into the lamp housing.

CAUTION

Be careful not to dirty or damage the lens, lens tab, and plastic housings.