Releasing the parking brake

Releasing the parking brake manually

OMQ4043023

  1. Have the ENGINE START/STOP button in the ON position.

  2. Press the brake pedal.

  3. Make sure the gear is shifted to P (Park) position.

  4. Press the EPB switch.

  5. Make sure the brake warning light turn off.

Releasing the parking brake automatically

  • Under the following conditions, the EPB is released automatically after slowly depressing the accelerator pedal. Check if the brake warning light is turned off:

    • The vehicle engine is running

    • The driver's seat belt is fastened

    • The driver's door, hood or trunk is closed

    • The gear is in R (Reverse) or D (Drive)

NOTE

  • For your safety, you can engage the EPB even though the ENGINE START/STOP button is in the OFF position, but you cannot release it.

  • Depress the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle.

NOTE

  • If the parking brake warning light is still on even though the EPB has been released, have the system inspected by an authorized Kia dealer.

  • Do not drive your vehicle with the EPB applied. It may cause excessive brake pad and brake rotor wear.