Automatic release of EPB

The EPB is released automatically under the following conditions.

  • Gear in P (Park)

    • With the engine running, engage the brake pedal and shift out of P (Park) to R (Reverse) or D (Drive).

  • Gear in N (Neutral)

    • With the engine running, engage the brake pedal and shift out of N (Neutral) to R (Reverse) or D (Drive).

  • Automatic transmission

    1. Start the engine.

    2. Fasten the driver's seat belt.

    3. Close the driver's door, hood and liftgate.

    4. Press the accelerator pedal while the gear is in R (Rear), D (Drive) or Sports mode.

Make sure the brake warning light goes off.

NOTE

  • You can engage the EPB even though the ENGINE START/STOP button is in the OFF position, but you cannot release it.

  • Press the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle.

Do not follow the above procedure when driving on flat level ground. The vehicle may suddenly move forward.

NOTE

If the parking brake warning light remains on even though the EPB has been released, have the system inspected by an authorized Kia dealer.

CAUTION

Do not drive your vehicle with the EPB applied. It may cause excessive brake pad and rotor wear.