Releasing EPB automatically

Operation

  • The EPB is released automatically under following conditions when you shift the gear.

    1. With the engine running, depress the brake pedal and shift out of P (Park) or N (Neutral) to R (Reverse) or D (Drive).

  • The EPB is released automatically under following conditions when you start driving,

    1. Ensure seat belts are fastened and the doors, bonnet and tailgate are closed.

    2. With the engine running, depress the brake pedal and shift out of P (Park) to R (Reverse), D (Drive) or Manual shift mode.

    3. Depress the accelerator pedal.

    4. Make sure the Parking Brake warning light goes off.

CAUTION

Do not drive your vehicle with the EPB applied. It may cause excessive brake pad and brake rotor wear.

NOTE

  • For the Middle East, EPB is released regardless of seat belt fastening.

  • Do not follow these procedures when driving on a flat level ground. The vehicle may suddenly move forward:

    • For your safety, depress the brake pedal and release the parking brake manually with the EPB switch when you drive downhill or when backing up the vehicle.

    • For your safety, you can engage the EPB even though the vehicle is in the OFF position, but you cannot release it.

  • If the parking brake warning light is still on even though the EPB has been released, have the system checked by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.