How to connect portable charger (ICCB: In-Cable Control Box)

  1. Turn OFF all switches, move the shift lever or dial to P (Park), and turn OFF the vehicle.

  2. Connect the plug to a household electric outlet.

    OCVQ011107N

  3. Check if the power lamp (green) illuminates on the control box.

    OCVQ011024

  4. Depress the brake pedal and apply the parking brake.

  5. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle. If charging is initiated without the gear in P (Park), the charging will start after the gear is automatically shifted to P (Park).

  6. Open the charging door.

  7. Open the protective caps of the charging connector and the charging plug. Check if there are any foreign substances or dust.

  8. Hold the charging connector handle and connect it to the vehicle charging inlet. Push the connector all the way in.

    NOTE

    If the charging connector and charging inlet are not connected properly, the connector may droop or vibrate. In this case, hold the charging connector handle and push it all the way in.

  9. Charging starts automatically (charging lamp illuminates).

    OCVQ011025

  10. Check if the charging indicator light ( ) of the high voltage battery in the instrument cluster is turned ON. Charging is not active when the charging indicator light ( ) is OFF. When the charging connector is not connected properly, reconnect the charging cable to charge it again.

  11. After charging has started, the estimated charging time is displayed on the instrument cluster for about 1 minute.

    OSG2PHQ012045L

    A: Remaining Time

    If you open the driver’s door while charging, the estimated charging time is also displayed on the instrument cluster for about 1 minute. When scheduled charging or scheduled air conditioner/heater is set, the estimated charging time is displayed as "--".

WARNING

If the charging connector and charging terminal are not connected properly, this may cause a fire.