Display and control

You can see the status of the Highway Lane Change Assist function operation in the Driving Assist view on the cluster. Refer to LCD display .

OMV073080L_2

Highway Lane Change Assist function will be displayed as below depending on the status of the function.

  1. Highway Lane Change Assist indicator

    • Green ( ) on: Ready state

    • Green ( ) blink: Operating state

    • Grey ( ) on: Standby state

    • White ( ) blink: Canceled state (display only a certain time)

  2. Lane line

    The lane line is displayed identical to Highway Lane Change Assist indicator (1). However, the lane detection availability will be showed on Standby state.

  3. Green arrow and shade

    The green arrow is displayed when a certain amount of time has passed after the function has started operating, and until the lane change has completed.

  4. Message

    • Message is displayed when the function does not operate even though the turn signal lever is used.

    • Message is displayed when the function is canceled while operating.

Highway Lane Change Assist function will turn on when the following conditions are satisfied.

  • The Driving Assist button or Lane Driving Assist button is used to turn on Highway Driving Assist.

  • The OK button is pressed on the steering wheel while a message asking to use Highway Lane Change Assist is displayed on the cluster.