How to disconnect AC charger

  1. When charging is complete, remove the charging plug from the electrical outlet of the AC charging station.

    OMVQ013008L

  2. Hold the charging connector handle and pull it out(2) while pushing the unlock button(1) on the charging connector.

    OMVQ013031L

  3. Make sure to completely close the charging door.

  4. Close the protection caps of the charging connector and the charging plug to protect them from foreign substances.

  5. If the personal charging connector is used, store the connector in the cable compartment.

NOTE

  • If you cannot open the charging door due to freezing weather, tap lightly or remove any ice near the charging door. Do not try to forcibly open the charging door.

  • Even though charging is possible with the EV button in the ON/START position, for you safety, start charging when the EV button is in the OFF position and the vehicle shifted to P (Park). After charging has started, you can use electrical components such as the radio by pressing the EV button to the ACC or ON position.

  • During AC charging, the radio reception may be bad.

  • During charging, the gear cannot be shifted from P (Park) to any other gear.

  • During DC charging, the radio reception may be bad.

  • Depending on the condition and durability of the high voltage battery, charger specifications, and ambient temperature, the time required for charging the battery may vary.

  • If the charging connector and charging inlet are not connected properly, the connector may droop or vibrate. In this case, hold the charging connector handle and push it all the way in.