Operating the climate control system
|
Mode |
Operation |
Air flow |
|
|---|---|---|---|
|
Front seats |
Rear seats (2nd/3rd) |
||
|
|
Air flow is directed toward the upper body and face. |
2 , 4 |
7 |
|
|
Air flow is directed towards the face and the floor. |
2 , 3 , 4 , 5 |
6 , 7 |
|
|
Air flow is directed towards the face, floor and the windshield with small amount directed to the side-window defrosters |
1, 2 , 3 , 4 , 5 |
6 , 7 |
|
|
Most of the air flow is directed to the floor, with a small amount of air directed to the windshield, side-window defrosters, and side air vents. |
1 , 3 , 4 , 5 |
6 |
|
|
Most of the air flow is directed to the floor and the windshield, with a small amount directed to the side-window defrosters and side air vents. |
1 , 3 , 4 , 5 |
- |
|
|
Most of the air flow is directed to the windshield, with a small amount of air directed to the side-window defrosters and side air vents. |
1 , 4 |
- |
*
*: if equipped
Operation
-
Start the vehicle.
-
Set the mode-selection buttons as desired. To improve the effectiveness of heating and cooling:
-
Heating: (
)
-
Cooling: (
)
-
-
Set the temperature control to the desired temperature level.
-
Set the air intake control to the position for outside (fresh) air if required.
-
Set the position of the fan speed control so that it runs at the desired speed.
-
If desired, turn the air conditioning ON with the temperature set high in order to dehumidify the air before it enters into the cabin.
If the windshield fogs up, select the Front Defrost (
) mode.
