When driving on an uphill or downhill, the system may not detect the vehicle in your lane and the regenerative braking level will reduce automatically, making you feel that the vehicle is accelerating.

Also, if the system suddenly recognizes the vehicle in front, the regenerative braking level will increase automatically, making you feel that the vehicle is decelerating.

The driver must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

When a vehicle changes lanes in front of you, the smart regeneration system may not immediately detect the vehicle, especially if the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

Some vehicles in your lane cannot be recognized by the sensor:

• Narrow vehicles such as motorcycles or bicycles

• Vehicles offset to one side

• Slow-moving vehicles or sudden-decelerating vehicles

• Stopped vehicles (When the vehicle ahead drives away, the system may not detect a stopped vehicle.)

• Vehicles with small rear profile such as trailers with no loads

A vehicle ahead cannot be recognized correctly by the sensor if any of following occurs:

• When the vehicle is pointing upwards due to overloading in the luggage compartment

• While the steering wheel is operating

• When driving to one side of the lane

• When driving on narrow lanes or on curves

Apply the brake or accelerator pedal if necessary.