Head lamp low beam (RHD Vehicle)
Figure 1. Based on 10m screen
OMV093051L

A: Vehicle axis

B: Vertical line of the left head lamp bulb center

C: Vertical line of the right head lamp bulb center

D: Horizontal line of head lamp bulb center

E: Ground

F: Cut-Off line

Operation

  • Turn the low beam on without driver aboard.

  • The cut-off line should be projected in the cut-off line shown in the picture.

  • When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.

  • Disengage the parking brake and put the gear in N (Neutral), in addition, if headlamp leveling device is equipped, adjust the headlamp leveling device switch to '0'.