Search by Title only
Home > Features of your vehicle > Rear View Monitor (RVM) > Rear View Monitor operation

Rear View Monitor operation

Rear view

The function will operate when the following conditions are satisfied:

  • ENGINE START/STOP button in the ON position

  • The gear is changed to R (Reverse) and the back up light turns on

Extended Rear View Monitor

  • When parking, the rear view will maintain showing on the screen if the following conditions are satisfied:

    • The gear is changed from R (Reverse) to N (Neutral) or D (Drive)

    • Vehicle speed is below 10 km/h (6 mph)

  • The rear view will turn off when vehicle speed is above 10 km/h (6 mph).

Driving rear view

The driver is able to check the rear view on the screen whilst driving, it is to assist with safe driving.

Rear View Monitor Operating conditions

  • ENGINE START/STOP button is in the ON position.

  • Parking/View button (1) is pressed with the gear in D (Drive) or N (Neutral).

Off conditions

  • Parking/View button (1) is repressed.

  • One of the infotainment system button is pressed.

When operating

  • If the gear is changed to R (Reverse), whilst Driving rear view is displayed on the screen, the screen will change to rear view with parking guidance.

  • When Driving rear view is displayed on the screen, an icon will appear on the upper right side of the screen indicating that the rear view is being displayed.

Rear top view

When you touch the icon (1), the top view is displayed on the screen and shows the distance from the vehicle in the back of your vehicle whilst parking.