Headlight leveling device

To adjust the headlight beam level according to the number of the passengers and loading weight in the luggage area, turn the beam leveling switch.
The higher the number of the switch position, the lower the headlight beam level. Always keep the headlight beam at the proper leveling position, or headlights may dazzle other road users.
Listed below are the examples of proper switch settings. For loading conditions other than those listed below, adjust the switch position so that the beam level may be the nearest as the condition obtained according to the list.
Loading condition |
Switch position |
---|---|
Driver only |
0 |
Driver + Front passenger |
0 |
Full passengers (including driver) |
1 |
Full passengers (including driver) + Maximum permissible loading |
2 |
Driver + Maximum permissible loading |
3 |
High Beam Assist (HBA) (if equipped)

High Beam Assist is a function that automatically adjusts the headlamp range (switches between high beam and low beam) depending on the brightness of detected vehicles and certain road conditions.
Detecting sensor

The front view camera is used as a detecting sensor to detect ambient light and brightness while driving.
Refer to the picture above for the detailed location of the detecting sensor.

-
Always keep the front view camera in good condition to maintain optimal performance of High Beam Assist.
-
For more details on the precautions of the front view camera, refer to More Details.
High Beam Assist Setting

A: Vehicle Settings
-
Lights
-
High Beam Assist
With the vehicle in the ON position, select User settings → Lights → High Beam Assist in the instrument cluster to turn on High Beam Assist function.

The information displayed on the infotainment system may not have some menu or may appear different from this user manual depending on the specifications of your vehicle. The infotainment system may change after software updates. For more details, access the manual using the QR code in the infotainment system quick reference guide.

For your safety, change the Settings after parking the vehicle at a safe location.
High Beam Assist operation
-
After selecting HBA (High Beam Assist) in the Settings menu, High Beam Assist will operate by following the procedure below.
-
Place the headlamp switch in the AUTO position and push the headlamp lever towards the instrument cluster. The High Beam Assist (
) indicator light will appear on the cluster and the function will be enabled.
-
When the function is enabled, high beam will turn on when vehicle speed is above 30 km/h (20 mph). When vehicle speed is below 20 km/h (12 mph), high beam will not turn on.
-
The High Beam (
) indicator light will appear on the cluster when high beam is on.
-
-
When High Beam Assist is operating, if the headlamp lever or switch is used, the function operates as follows:
-
If the headlamp lever is pulled towards you when the high beam is off, the high beam will turn on without High Beam Assist canceled. When you let go of the headlamp lever, High Beam Assist will turn on again.
-
If you push the light switch towards the instrument cluster, high beam is turned on and High Beam Assist is released.
-
If the headlamp lever is pulled towards you when the high beam is on by High Beam Assist, low beam will be on and the function will turn off.
-
If the headlamp switch is placed from AUTO to another position (headlamp/position/off), High Beam Assist will turn off and the corresponding lamp will turn on.
-
-
When High Beam Assist is operating, high beam switches to low beam if any of the following conditions occur:
-
When the headlamp of an oncoming vehicle is detected.
-
When the taillamp of a vehicle in front is detected.
-
When the headlamp or taillamp of a motorcycle or a bicycle is detected.
-
When the surrounding ambient light is bright enough that high beams are not required.
-
When streetlights or other lights are detected.
-
High Beam Assist malfunction and limitations
High Beam Assist malfunction

A: Check HBA (High Beam Assist) system
When High Beam Assist is not working properly, the 'Check High Beam Assist system' warning message will appear and warning
light () will appear on the cluster. Have the function inspected by an authorized Kia dealer.
Limitations of High Beam Assist
High Beam Assist may not work properly in the following situations:
-
Light from a vehicle is not detected because of lamp damage, or because it is hidden from sight, etc.
-
Headlamp of a vehicle is covered with dust, snow or water.
-
A vehicle's headlamps are off but the fog lamps are on and etc.
-
There is a lamp that has a similar shape as a vehicle's lamp.
-
Headlamps have been damaged or not repaired properly.
-
Headlamps are not aimed properly.
-
Driving on a narrow curved road, rough road, uphill or downhill.
-
Vehicle in front is partially visible on a crossroad or curved road.
-
There is a traffic light, reflecting sign, flashing sign or mirror ahead.
-
There is a temporary reflector or flash ahead (construction area).
-
The road conditions are bad such as being wet, iced or covered with snow.
-
A vehicle suddenly appears from a curve.
-
The vehicle is tilted from a flat tire or is being towed.
-
Light from a vehicle is not detected because of smoke, fog, snow, etc.

-
Depending on the instrument cluster specification or theme, images or colors may be displayed differently.
-
For more details on the limitations of the front view camera, refer to More Details.

-
At times, High Beam Assist may not work properly. The function is for your convenience only. It is the responsibility of the driver for safe driving practices and always check the road conditions for your safety.
-
When High Beam Assist does not operate normally, change the headlamp position manually between high beam and low beam.