Position lamp/Daytime running lamp replacement (if equipped)

-
Disconnect the negative (-) battery terminal.
-
Remove the engine under cover.
-
Disconnect the daytime running lamp connector.
-
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
-
Remove the bulb from the socket by pressing it in and rotating it counter-clockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
-
Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
-
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
-
Connect the daytime running lamp connector.
-
Install the engine under cover assembly to the body of the vehicle.