Search by Title only
Home > Features of your vehicle > Manual climate control system > System operation

System operation

Ventilation

  1. Set the mode to the position.

  2. Set the air intake control to the outside (fresh) air position.

  3. Set the temperature control to the desired position.

  4. Set the fan speed control to the desired speed.

Heating

  1. Set the mode to the position.

  2. Set the air intake control to the outside (fresh) air position.

  3. Set the temperature control to the desired position.

  4. Set the fan speed control to the desired speed.

  5. If dehumidified heating is desired, turn the air conditioning system (if equipped) on.

  • If the windscreen fogs up, set the mode to the or position.

Operation Tips

  • To keep dust or unpleasant fumes from entering the car through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the control to the fresh air position when the irritation has passed to keep fresh air in the vehicle. This will help keep the driver alert and comfortable.

  • Air for the heating/cooling system is drawn in through the grilles just ahead of the windscreen. Care should be taken that these are not blocked by leaves, snow, ice or other obstructions.

  • To prevent interior fog on the windscreen, set the air intake control to the fresh air position and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to desired temperature.

Air conditioning (if equipped)

Kia Air Conditioning Systems are filled with environmentally friendly R-134a refrigerant.

  1. Start the engine. Push the air conditioning button.

  2. Set the mode to the position.

  3. Set the air intake control to the outside air or recirculated air position.

  4. Adjust the fan speed control and temperature control to maintain maximum comfort.

NOTICE

  • When using the air conditioning system, monitor the temperature gauge closely whilst driving up hills or in heavy traffic when outside temperatures are high. Air conditioning system operation may cause engine overheating. Continue to use the blower fan but turn the air conditioning system off if the temperature gauge indicates engine overheating.

  • When opening the windows in humid weather air conditioning may create water droplets inside the vehicle. Since excessive water droplets may cause damage to electrical equipment, air conditioning should only be used with the windows closed.

Air conditioning system operation tips

  • If the vehicle has been parked in direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape.

  • To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system.

  • During air conditioning system operation, you may occasionally notice a slight change in engine speed as the air conditioning compressor cycles. This is a normal system operation characteristic.

  • Use the air conditioning system every month only for a few minutes to ensure maximum system performance.

  • When using the air conditioning system, you may notice clear water dripping (or even puddling) on the ground under the passenger side of the vehicle. This is a normal system operation characteristic.

  • Operating the air conditioning system in the recirculated air position provides maximum cooling, however, continual operation in this mode may cause the air inside the vehicle to become stale.

  • During cooling operation, you may occasionally notice a misty air flow because of rapid cooling and humid air intake. This is a normal system operation characteristics.